Auditorium chair LS-338V
- Auditorium seat
- Fixed installation
¥435.00
Enquiry
Description
- Product description
- Product model: BS338
- The seven-layer hardwood molding board is made of high frequency wave and high pressure. It has strong supporting force, impact resistance and deformation resistance. It is equipped with unique honeycomb sound-absorbing pores, and the overall sound-absorbing rate is 5.
- The sponge used for seat and back foam is made according to the principle of human sitting engineering. It has high elasticity, comfortable and durable. The sponge density of the seat is greater than 50kg/m3, and the sponge density of the back is greater than 45kg/m3.
The chair seat and back lining board are made of seven layers of hardwood plywood, which is made of high frequency wave and high pressure. It has strong supporting force, impact resistance and deformation resistance. - Fabric: imported flannelette; Flame retardant performance passed the national test, (available in a variety of colors).
Handrail surface use solid wood.
Metal part:
Metal part (aluminum alloy ventilation foot)
According to the relevant national standards of production, all kinds of steel skeleton surface after pickling rust removal, alkali washing oil removal, phosphating drying process, using electrostatic powder spraying (matte black or gray); The wall thickness of the iron frame is not less than 0mm.
Seat with built-in spring resistance automatic slow recovery device, so that the seat can be automatic
Reset. No noise, zero failure. - Armrest is made of aluminum alloy die-casting,450mm*370mm, the surface is polished.
- Writing board and writing board mechanism: the writing board mechanism is a pull-out mechanism, and the supporting part of the writing board is made of aluminum alloy. The surface is finished with fine polishing. Service life more than 5 years. Tablet is solid aluminum alloy.
- Exclusive open die casting aluminum alloy ventilation feet, 260mm*270mm, front and rear respectively 18 ventilation holes, left and right sides respectively 12 ventilation holes
- V-shaped aluminum alloy support frame, integrated die casting, high strength, the surface is polished.以上翻译结果来自有道神经网络翻译（YNMT）·
Additional information
| seat | Backplane material seven-layer hardwood molding board, made of high frequency wave, high pressure, strong supporting force, impact resistance, deformation resistance, with a unique honeycomb sound absorption hole, the overall sound absorption rate of 0.5, the whole audience can eliminate echo within 0.1 seconds, ensure good breathable performance of the seat and the whole venue noise free. |
|---|---|
| Back of seat | The foam sponge on the back of the seat is made of sponge, which is made according to the principle of human sitting engineering. It has high elasticity, comfortable and durable. The sponge density of the seat is greater than 50kg/m3, and the sponge density of the back is greater than 45kg/m3 |
| Seat and back | The chair seat and back lining board are made of seven layers of hardwood plywood, which is made of high frequency wave and high pressure. It has strong supporting force, impact resistance and deformation resistance. |
| cloth | Imported flannelette cloth; Flame retardant performance passed the national test, (available in a variety of colors). |
| Writing board and writing board mechanism | Writing board and writing board mechanism: the writing board mechanism is a pull-out mechanism, and the supporting part of the writing board is made of aluminum alloy. The surface is finished with fine polishing. Service life more than 5 years. Tablet is solid aluminum alloy. |
| Metal part | Exclusive open die casting aluminum alloy ventilation feet, 260mm*270mm, front and rear respectively 18 ventilation holes, left and right sides respectively 12 ventilation holes |
